9
10Mbps or when there is no connection.
Twisted-Pair Ports
There are 24 Twisted-Pair shielded RJ45 ports on the Switch. These
ports support automatic MDI-II/MDI-X crossover detection function,
which provides true “plug-and-play” feature and avoids the confusing
of crossover cables or crossover (uplink) ports.
With the Auto -MDI function, you just need to connect the network
cable to the Switch; it does not matter if the end node is NIC (Network
Interface Card) or other Ethernet port.
Rear Panel
AC Power Connector
Connect the power cord’s female end to this connector.
Please note that there is no Power On/Off switch on this
Switch. When the power cord is connected to the Switch
and the correct power source, the Switch is powered on.
