2. I cannot connect to the Access Point or the Wireless Router.
·
Make sure that the SSID on the TEW-301PC PCI adapter is exactly
the same as the SSID on the Access Point or Wireless Router.
3. The TEW-30
1PC
Power and Link lights are not on.
·
Check to see if the TEW-301PC PCI adapter is firmly inserted into a
PC PCI slot.
4. I forgot my Encryption key.
·
Reset the Access Point to its factory default settings and restore the
TEW-301PC Wireless PCI Adapter to the factory default settings.
(The default settings are listed in Ch.6:
Using the Configuration
Utility
in this manual.)
5. The computer does not recognize the TEW-30
1PC
Wireless Adapter.
·
Make sure that the TEW-301PC Wireless Adapter is properly seated
in the computer's PCI slot.
·
If Windows does not detect the hardware upon insertion of
theadapter, make sure to completely remove drivers that were
previously loaded. To remove the drivers, do the following:
A.Under
Tools
> select
Folder Options
…> select
View
> under
Hidden files and folders
> select
Show hidden files and
folders
B.Uncheck
Hide extension for known file types
> click on
Apply
C.Search for the files
TIACXLN.INF
and
TIACXLN.SYS
.
Remove these files from the
INF
and
SYSTEM32
(DRIVERS)
folders in the Windows directory. Note: Windows XP and
Windows 2000 will rename
.inf
files that have not received
WHQL certification into
oem.inf
files (e.g.,
oem1.inf.)
6. The computer with the TEW-301PC installed is unable to connect to
the wireless network.
·
Check that the LED indicators for wireless products are indicating
normal activity. If not, there may be a problem with the device.
·
Check that the LED indicators on the wireless router are
functioning properly. If not, check that the AC power and Ethernet
cables are firmly connected.
·
Check that the IP Address, subnet mask, gateway, and DNS settings
are correctly entered for the network.
23
