© Copyright 2017 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide
TEW-740APBO / TEW-740APBO2K
32
SNMP v3
1. Log into your access point management page (see “
Access your access point
management page
” on page 28).
2. Click System and click on SNMP. Review the settings and click Save to apply the
changes.
Active – Enable or disable SNMP version 3.
RO Username – Enter the read only user name.
RO Password – Enter the read only password.
RW Username – Enter the read/write user name.
RW Password – Enter the read/write password.
SNMP Trap
1. Log into your access point management page (see “
Access your access point
management page
” on page 28).
2. Click System and click on SNMP. Review the settings and click Save to apply the
changes.
Active – Enable or disable SNMP Trap.
Community – Enter the community name for SNMP trap.
IP 1 – Enter the IP address of the 1
st
SNMP trap receiver.
IP 2 – Enter the IP address of the additional SNMP trap receiver.
IP 1 – Enter the IP address of the additional SNMP trap receiver.
IP 1 – Enter the IP address of the additional SNMP trap receiver.
Summary of Contents for TEW-740APBO
Page 1: ...TRENDnet User s Guide Cover Page ...
Page 93: ......
