26
L2TP (Layer Two Tunneling Protocol) uses a virtual private network to connect to your ISP. This
method of connection requires you to enter a Username and Password (provided by your
Internet Service Provider) to gain access to the Internet.
L2TP Server IP Address:
The ISP provides this parameter, if necessary. The value may be the
same as the Gateway IP Address.
Reconnect Mode:
Typically PPPoE connections are not always on. The router allows you to
set the reconnection mode. The settings are:
Always on:
A connection to the Internet is always maintained.
On demand:
A connection to the Internet is made as needed.
Manual:
You have to open up the Web-based management interface and click the Connect
button manually any time that you wish to connect to the Internet.
Maximum Idle Time:
Time interval the machine can be idle before the PPPoE connection is
disconnected. The Maximum Idle Time value is only used for the "On demand" and "Manual"
reconnect modes.
WAN Interface IP Type
Static:
If your ISP has assigned a fixed IP address, select this option. The ISP provides the
values for the following fields for
WAN Interface IP Setting: IP Address, Subnet Mask ,
Default Gateway.
Dynamic:
If the ISP's servers assign the router's IP addressing upon establishing a connection,
select this option.
PPTP
PPTP (Point to Point Tunneling Protocol) uses a virtual private network to connect to your ISP.
This method of connection is primarily used in Europe. This method of connection requires you
to enter a
Username
and
Password
(provided by your Internet Service Provider) to gain
access to the Internet.
PPTP Server IP Address:
The ISP provides this parameter, if necessary. The value may be
the same as the Gateway IP Address.
Reconnect Mode:
Typically PPPoE connections are not always on. The router allows you to
set the reconnection mode. The settings are:
Always on:
A connection to the Internet is always maintained.
On demand:
A connection to the Internet is made as needed.
Manual:
You have to open up the Web-based management interface and click the Connect
button manually any time that you wish to connect to the Internet.
Maximum Idle Time:
Time interval the machine can be idle before the PPPoE connection is
disconnected. The Maximum Idle Time value is only used for the "On demand" and "Manual"
reconnect modes.
WAN Interface IP Type
Summary of Contents for TEW-800MB
