27
Static:
If your ISP has assigned a fixed IP address, select this option. The ISP provides the
values for the following fields for
WAN Interface IP Setting: IP Address, Subnet Mask ,
Default Gateway
, and optional for
DNS Server
Dynamic:
If the ISP's servers assign the router's IP addressing upon establishing a connection,
select this option.
MAC Address Clone
Each networking device has it's own unique MAC address defined by the hardware
manufacturer. Some ISP's may check your computer's MAC address. Some ISP's record the
MAC address of the network adapter in the computer or router used to initially connect to their
service. The ISP will then only grant Internet access to requests from a computer or router with
this particular MAC address. This router has a different MAC address than the computer or
router that initially connected to the ISP. If you need to change the MAC address of the rounter's
WAN-side Ethernet interface, either type in an alternate MAC address (for example, the MAC
address of the router initially connected to the ISP) or copy the MAC address of a PC. To copy
the MAC address of the computer that initially connected to the ISP, connect to the router using
that computer and click the
Clone Your PC's MAC Address
button. The WAN interface will
then use the MAC address of the network adapter in your computer.
Summary of Contents for TEW-800MB
