background image

  1. Before You Start

Ÿ
Ÿ

A Desktop or Laptop PC with Network Adapter Installed

Ÿ

Existing 10/100Mbps wired network when TPL-305E is used as a bridge device

®

Ÿ

Additional HomePlug  AV powerline adapter(s) (e.g. TRENDnet TPL-303E/E2K, 
TPL-304E/E2K, TPL-310AP, or another TPL-305E)

CD-ROM Drive

Note: The configuration utility will allow you to add security to your powerline 
network by providing you with the ability to change the default network name and 
create your own personal network name for your powerline network. The utility can 
also help you to troubleshoot connectivity between powerline adapters by verifying 
the network name.  Please refer to the User's Guide on the TPL-305E CD-ROM for 
instructions on installing and using the utility.

Package Contents

Ÿ
Ÿ

CD-ROM (Utility and User’s Guide)

Ÿ

Multi-Language Quick Installation Guide

Ÿ

Cat.5 Ethernet Network Cable (1.5m/5ft)

TPL-305E

System Requirements

1

Supported Operating Systems

CPU

Memory

Windows 7 (32/64-bit)

Windows Vista (32/64-bit)

Windows XP (32/64-bit)

1GHz or above 

800MHz or above

300MHz or above

1GB RAM or above 

512MB RAM or above 

256MB RAM or above 

Summary of Contents for TPL-305E














Reviews: