background image

 

 

 

 

 

 

 

 

  

 

© Copyright 2012 TRENDnet. All Rights Reserved. 

 

 

 

 
TRENDnet User’s Guide

 

TPL-306E / TPL-306E2K 

9

 

To reconfigure an additional Powerline adapter to connect and use the encryption key 
of your existing Powerline network: 

 

1. Verify that all existing Powerline adapters are already installed and connected.  

 

2. Push and hold the 

Sync

 button on the additional Powerline adapter for 10 seconds 

and release it. All LEDs will turn off and turn back on. This will erase the current 
encryption key assigned to the additional Powerline adapter. 

 

3. Push and hold the 

Sync

 button on one of the existing Powerline adapters connected 

to your Powerline network for 2 seconds and release it. The 

Power

 (

PWR) LED

 will start 

blinking. 

 

4. Within 2 minutes, push and hold the

 Sync

 button on the additional Powerline adapter 

for 2 seconds and release it. The 

Power

 (

PWR) LED

 will start blinking. This will 

reconfigure your additional Powerline adapter to connect and use the encryption key of 
your existing Powerline network. All LEDs will turn off and turn back on and the 

Powerline (PL) LED

 will turn on the adapters are connected. 

 

To reconfigure the encryption key and connect additional Powerline adapters to your 
existing Powerline network, repeat the steps above for each adapter. 

 

 

 

Using the Powerline Utility 

 

The Powerline Utility allows you to do the following: 

 

Create a customized encryption key for your Powerline network and apply it to 

multiple Powerline adapters at the same time. 

 

Allows you to view the Powerline adapters connected to your network (using 

the MAC address) and the approximate connection quality and speed of each 
Powerline adapter  

 

View and upgrade your Powerline adapter firmware version.

 

Note: 

Link speed displayed in the utility of your Powerline adapters to another 

through your electrical system is estimated. Actual link speed may vary.  

 

Before installing and using the utility, please ensure the following:

 

 

Write down the 

Device Password (DPW)

 (16-digit

 

characters A-Z only) and 

MAC 

Address 

(12-digit characters a-f, A-F, 0-9)

 

of each Powerline adapter as this will 

be required to change the encryption key for multiple Powerline adapters. See 
“Product Hardware Features” on 

page 2

 

Make sure your computer in which you are installing the utility is connected to 

your network and your Powerline adapters are also connected to your network. 

 

If you have changed your encryption key using the 

Sync

 button and you are 

creating a customized encryption key, it is required to reset all Powerline 
devices to defaults using the physical 

Reset

 button on your Powerline adapter 

first before using the utility. See “Product Hardware Features” on 

page 2

 

Please ensure that your Powerline adapters are already installed and connected 

and the Ethernet port on each adapter is connected to a device powered on. 

 

Powerline Utility System Requirements 

Supported  Operating Systems 

CPU 

Memory 

Windows 7 (32/64-bit) 

1GHz or above  

1GB RAM or above  

Windows Vista (32/64-bit) 

800MHz  or above 

512MB RAM or above  

Windows XP (32/64-bit)  

300MHz or above 

256MB RAM or above  

Summary of Contents for TPL-306E































Reviews: