TRENDnet TPL-310AP, Quick Installation Manual

15

  Wireless Tips

The following are some general wireless tips to help minimize the impact of interference within an 
environment. 

Assign your network a unique SSID

Do not use anything that would be identifying like “Smith Family Network”. Choose 
something that you would easily identify when searching for available wireless networks. 

Do not turn off the SSID broadcast

The SSID broadcast is intended to be on and turning it off can cause connectivity issues.  
The preferred method of securing a wireless network is to choose a strong form of encryption 
with a strong and varied encryption key.  

Change the channel

Most wireless access points and routers are defaulted to channel 6.  If you have a site survey 
tool that will display the channels you can plan your channel selection around neighboring 
access points to minimize interference from them.  If your site survey tool does not display 
the channel try using channels 1 or 11.

If you are using 802.11n you should be securing the network with WPA2 security. 

Please also make sure that the wireless hardware is not placed in any type of shelving or 
enclosures.  

Avoid stacking hardware on top of each other to prevent overheating issues

Maintain enough free space around the hardware for good ventilation and airflow.  There 
should also be plenty of free space around the antennas to allow the wireless signal to 
propagate. 

There are a number of other environmental factors that can impact the range of wireless 
devices.

1. 

Adjust your wireless devices so that the signal is traveling in a straight path, rather than at 

an angle.  The more material the signal has to pass through the more signal you will lose.

2.

Keep the number of obstructions to a minimum. Each obstruction can reduce the range of 
a wireless device.  Position the wireless devices in a manner that will minimize the amount 
of obstructions between them. 

Note: after setting up the SSID, encryption type and encryption key/passphrase, please 
make a note of them for future reference. You will need this information to connect your 
wireless computers to the wireless router/access point.

Note:  Due to Wi-Fi certification considerations if you choose WEP, WPA or WPA2-TKIP 
encryption this device may operate in legacy wireless mode (802.11b/g).   You may not get 
802.11n performance as these forms of encryption are not supported by the 802.11n 
specification.