TRENDnet TPL-310AP, Quick Installation Manual

3

Note:

When installing for the first time, it is required that you configure the Access Point from a wired 
computer.  Assign a Static IP address to your computer's network adapter in the subnet of 
192.168.10.x.  Since the Access Point's default IP address is 192.168.10.100, make sure no other 
network devices are assigned an IP address of 192.168.10.100.  (Refer to Troubleshooting section 
on how to configure TCP/IP settings on your PC.)

2. 

Connect a network cable from the TPL-310AP's 

network port into your computer's network port.

4. 

Assign a Static IP address to your computer's 
network adapter in the subnet of 192.168.10.x.  
(Refer to Troubleshooting section on how to 
configure TCP/IP settings on your PC.)

Outlet

1. 

Plug the TPL-310AP into an available power 

outlet. The TPL-310AP should be within reach 
of your computer's network cable.

  2. Configure the TPL-310AP

3. 

Move the Power switch to the “On” position.

5. 

Open your web browser, type 

http://192.168.10.100

 in the Address bar, and 

then press 

Enter

.

6. 

Enter the User Name and 

    password and then click 

OK

.  Default Settings:

User name: 

admin

    Password:  

admin

    Note: User name and Password are case
    sensitive.