the drop list.
Pre-Shared Key
Enter the Pre-shared Key according to the pre-
shared key format you select. This field must be
filled with character longer than 8 and less than
64 lengths. (The default value is 1234567890ab)
* Please click on the
Apply Changes
button or the
Reset
button to save/reset the configuration.
3.4.7
Access Control
To restrict the clients of Access authentication of wireless clients by MAC address, set up the access list
in this page. If the Wireless Access Control Mode is set to "Allow Listed", only the wireless LAN clients
whose MAC addresses are listed in the Current Access Control List will be able to connect to the wire-
less access point and all other clients not listed will be denied access. If the mode is set to "Deny
Listed", the wireless LAN clients whose MAC addresses are listed in the Current Access Control List will
not be able to connect to the wireless access point and all other clients will be allowed access. This fea-
ture is only available when using AP, AP+WDS, or AP+Mesh modes located under Wireless > Basic
Clicking “Delete Selected” will delete the checked entries in the list.
Clicking “Delete All” will delete all of the entries listed.
Items
Information
Wireless Access Control
Mode
Click on the drop list to choose the access
control mode. You may select “Allow listed” to
allow those allowed MAC addresses or select
“Deny Listed” to ban those MAC addresses
from accessing to this device or select
“Disable”.
MAC Address &
Comment
Fill in the MAC address that you wish to
control, and give a definition to it.
(MAC Address Format: xxxxxxxxxxxx)
Current Access Control
list
Lists the MAC Access Control Settings you have
added before. Click on the list to change
configuration. To Delete the station on the list,
mark the check box in the select item and click
the “Delete Selected”. If you want to delete all
