background image

 

 

 

 

 

 

 

 

  

 

© Copyright 2012 TRENDnet. All Rights Reserved. 

 

 

 

 
TRENDnet User’s Guide

 

TPL-405E 

 

23

 

Troubleshooting 

 

Please reference the items below if you continue to experience difficulty with installing 
and using your Powerline adapters. 

 

 

Power-cycle the Powerline adapters by disconnecting them from their power 

outlets for 15 seconds and then reconnect them.   

 

If the Powerline (PL) LED is red, try plugging the Powerline adapter into another 

available power outlet.  The quality of the connection may be better in a 

different power outlet. 

 

If you are having issues connecting the Powerline adapters after changing the 

encryption key using the Sync button or Powerline utility, reset the Powerline 

adapters to defaults using the physical Reset button.  

 

Using a pin or paperclip; press and hold the Reset button for 1 second on each 

Powerline adapter. All LEDs will turn off then turn back on. This will reset the 

Powerline adapters to their default settings.  The default encryption key is 

HomePlugAV. 

 

The Powerline adapters can provide better connectivity and performance when 

plugged directly into a power outlet.  Connecting the Powerline adapters to a 

power strip or surge protector may degrade or block Powerline signals.  

 

Avoid using the Powerline adapters on GFI protected outlets and electrical 

systems with AFCI circuit breakers.  They may degrade or block Powerline 

signals.  

 

The Powerline adapters should not be used in areas with excessive heat. 

 

Florescent and incandescent lighting can generate significant Powerline 

interference.    

 

If your building has more than one circuit breaker box, the Powerline adapter 

may not be able to establish connectivity between them. In this case, connect a 

Powerline adapter into a power outlet located on each of the circuit breaker 

boxes.  Then connect an Ethernet cable between the Powerline adapters to 

bridge the two circuits together.

 

 

 

 
 

In addition to this User’s Guide, you can find help below: 
 

 

http://www.trendnet.com/support

 

(documentation, downloads, FAQs, how to contact technical support) 

 

 

Autorun CD (Quick Installation Guide) 

 
 

 

 

Summary of Contents for TPL-405E































Reviews: