background image

 

 

 

 

 

 

 

 

  

 

© Copyright 2012 TRENDnet. All Rights Reserved. 

 

 

 

 
TRENDnet User’s Guide

 

TPL-407E / TPL-407E2K 

6

 

Add adapters to your network 

 
Once you have installed and connected the first Powerline adapter to your router, you 

can easily extend your network to other rooms by adding additional Powerline adapters. 
 

To extend your network using an additional Powerline adapter: 
 

1. First, make sure the first Powerline adapter is installed and connected to your router. 

Note: 

This will allow devices connected to your Powerline network to access the Internet 

and other devices connected to your network. See “Connect a Powerline adapter to your 

router” on 

page 5

 
2. Plug the additional Powerline adapter into an available wall power outlet in another 

room near a computer or network device (e.g. game consoles, network-enabled TVs, 

network attached storage, network media server/players, etc.) that you would like to 

connect to your network. 
 
3. Connect the included Ethernet cable from the Ethernet port on your Powerline 

adapter to the to the Ethernet port of your computers or network devices. 
 
4. After the additional Powerline adapter is connected and installed to your computer or 

network device, wait for the 

Powerline (PL) LED

 to turn on. After the 

Powerline (PL) LED

 

turns on, verify that the 

Power (PWR) LED

 is on, the 

Powerline (PL) LED

 is on or 

blinking, and the 

Ethernet Connection (ETH) LED

 is on or blinking. 

 
Note: 

To verify that your Powerline adapters are connected successfully to your network, 

you can check if the computer(s) or network device(s) can access the Internet through 

your Powerline network. 

 

 
To install additional Powerline adapters in other rooms, repeat the steps above for 

each adapter. 

 

 
 

 

Summary of Contents for TPL-407E
































Reviews: