© Copyright 2018 TRENDnet. All Rights Reserved.
6
TRENDnet User’s Guide
TU3-ETGH3 / TUC-ETGH3
6.
Once the driver installation is complete, click Finish to exit the Install Wizard.
Now the installation is completed. You can connect the adapter to your USB
3.0/2.0 port, then connect your network cable from the router to the adapter.
The Link LED should light up green to indicate a proper physical connection
between the adapter and the network. If the Link LED doesn’t light up, please
verify the cable connections between all the network devices.
Verifying Driver Installation
For Windows
Once you finished the installation, you can open Windows Device Manager to
verify if your Ethernet adapter is properly installed.
To access the Device Manager:
On Windows
10/8.1/8, open Control Panel and click on Device
Manager
In the Network adapters group, an item named Realtek USB GbE Family
Controller #2 should be displayed.
If there is a question or exclamation mark next to that item, then the driver is
not properly installed. Please delete the item, select the Delete the driver
software for this device option (if provided), unplug the adapter from your
computer and then repeat the installation steps.
