9
English
5. Connection through Telnet
To use Telnet, Internet Access must have been previously setup so that the
gateway is visible on the internet (See User Guide for More Information).
Alternatively, you can use Telnet to locally access the TVP-224HR, if you are
under a router or switch and the TVP-224HR and your computer are in the
same network segment.
To access the TVP-224HR Gateway from a remote location using Telnet,
perform the following tasks:
Task
Prompt
Type
Open the windows command prompt and enter the telnet
command followed by the IP address of the TVP-224HR
Gateway you want to access.
Password:
Console>
Login:
admin
123
ping
xxx.xxx.xxx
None
telnet
xxx.xxx.xxx
When the TVP-224HR Gateway prompts you to
Login
, enter
the user name "admin”
When the TVP-224HR Gateway prompts you for
Password
,
enter the password. “Console>” will appear. The default
password is "123" but it is recommended that the password be
changed for security considerations. The password can be
changed from the Web Browser Administration / Password
submenu page.
Type in “ping xxx.xxx.xxx”, where xxx.xxx.xxx is your ISP
provided DNS Server IP or any known Public Internet Address.
The following dialogue confirms Internet Access
Console>ping 168.95.1.1
ping <168.95.1.1>: 56 data bytes
168.95.1.1 is alive
If the ping times out, you do not have Internet Access or the
Public IP Address you pinged is incorrect. Try another IP
Address. If you confirm that you do not have Internet Access,
please refer to the trouble shooting section of the User Manual
or consult your ISP to make sure your Internet Access Data is
correct and accurately entered into the TVP-224HR.
