Thank you for purchasing the TVP-224HR. This VoIP Gateway Router will
allow you to share your broadband Internet connection with wired 10/100Mbps
Fast Ethernet computers as well as integrate your existing analog / PBX phone
system for Internet telephone.
This guide will help you setup and configure your VoIP Gateway Router.
Following the installation instructions should be quick and easy. If you run into
problems, please refer to the detailed installation procedures on the CD User's
Guide. If you need further technical support, please visit www.TRENDNET.com
or call by phone.
Verify Equipment
Before installing the VoIP Gateway Router you should have:
1.
A working DSL Internet connection with Static IP or Dynamic IP with
DDNS.
2.
Cable / DSL Modem
3.
A computer with wired network card installed.
4.
TCP/IP protocol installed on each wired computer.
5.
A Web Browser such as Internet Explorer (5.0 or higher) or Netscape
Navigator (4.7 or higher).
Verify Package Contents
Please make sure you have everything in the box:
1
TVP-224HR
CD-ROM
Quick Installation Guide
AC Power Adapter
RJ45 Ethernet (LAN) Cable
RS-232 Console Cable
English
1. Prepare for Installation
English QIG
Copyright ©2005. All Rights Reserved. TRENDware International, Inc.
TRENDnet
TRENDware, USA
What's Next in Networking
Version 07.25.05
4-port VoIP Gateway with 4-port Broadband Router
Quick Installation Guide
TVP-224HR