Connecting the drone to the remote
After the battery has been charged for at least 240 minutes, you can
switch it on by pressing the button on the battery. The Drone should
now beep and the lights will flash on the Drone.
Place the Drone on a stable surface. Switch on the remote by sliding
open the holder. Check out the image below. The remote and Drone
will now automatically connect to each other. Now press the two
joysticks down towards each other at the same time. Then press the
calibration button on the second left on top of the remote. Lift the
Drone and rotate it horizontally and vertically until the remote
beeps. Then connect the Drone to the app. Download the app and
connect to the WiFi network of the Drone via your phone settings.
Turn off 4G. Now follow the steps in the app. By being able to fly the
Drone, unlock it by pressing both joysticks left and right in the
corner. Accelerate with the left stick. If the engines stop running
while accelerating. Then press the GPS button.
Summary of Contents for TURIBNE MAX
