Key Finder "myTracker"
Instruction Manual
English
3
How to get started
Remove the transmitter, receivers, the
button cell batteries, metal rings and the
stand from the packaging.
Open the battery case of the transmitter
by pushing down the back cover with
your thumb as shown in the picture.
Insert two 1.5 Volt AAA-batteries.
Please ensure the "+" & "-" polarities
are correct.
Close the battery case by pushing up the
back cover with your thumb until it clicks
into place.
Open the battery case of the receiver by
turning the cover to the left. Use a small
coin or a screwdriver.
Insert one 3 Volt CR2032 button cell
battery. Please ensure the "+" & "-"
polarities are correct (positive faces up,
negative faces down).
Close the battery case by twisting the
back cover to the right.
1.
3.
2.
4.
5.
6.
7.
Open the battery case
of the receiver
Open the battery case
of the transmitter
(continued on page 4)
