background image

  

TE0714 TRM

Revision: v.55

Copyright ©  2019 Trenz Electronic GmbH

22 of 22

http://www.trenz-electronic.de

26 

http://guidance.echa.europa.eu/

27 

https://echa.europa.eu/candidate-list-table

28 

http://www.echa.europa.eu/

Trenz Electronic is a manufacturer and a distributor of electronic products. It is therefore a so called downstream 
user in the sense of 

REACH

26

. The products we supply to you are solely non-chemical products (goods). Moreover 

and  under  normal  and  reasonably  foreseeable  circumstances  of  application,  the  goods  supplied  to  you  shall  not 
release  any  substance.  For  that,  Trenz  Electronic  is  obliged  to  neither  register  nor  to  provide  safety  data  sheet. 
According to present knowledge and to best of our knowledge, no 

SVHC (Substances of Very High Concern) on the 

Candidate  List

27

 are  contained  in  our  products.  Furthermore,  we  will  immediately  and  unsolicited  inform  our 

customers in compliance with REACH - Article 33 if any substance present in our goods (above a concentration of 
0,1 % weight by weight) will be classified as SVHC by the 

European Chemicals Agency (ECHA)

28

.

RoHS

Trenz Electronic GmbH herewith declares that all its products are developed, manufactured and distributed RoHS 
compliant.

WEEE

Information  for  users  within  the  European  Union  in  accordance  with  Directive  2002/96/EC  of  the  European 
Parliament and of the Council of 27 January 2003 on waste electrical and electronic equipment (WEEE).

Users of electrical and electronic equipment in private households are required not to dispose of waste electrical 
and  electronic  equipment  as  unsorted  municipal  waste  and  to  collect  such  waste  electrical  and  electronic 
equipment separately. By the 13 August 2005, Member States shall have ensured that systems are set up allowing 
final holders and distributors to return waste electrical and electronic equipment at least free of charge. Member 
States shall ensure the availability and accessibility of the necessary collection facilities. Separate collection is the 
precondition  to  ensure  specific  treatment  and  recycling  of  waste  electrical  and  electronic  equipment  and  is 
necessary to achieve the chosen level of protection of human health and the environment in the European Union. 
Consumers  have  to  actively  contribute  to  the  success  of  such  collection  and  the  return  of  waste  electrical  and 
electronic equipment. Presence of hazardous substances in electrical and electronic equipment results in potential 
effects  on  the  environment  and  human  health.  The  symbol  consisting  of  the  crossed-out  wheeled  bin  indicates 
separate collection for waste electrical and electronic equipment.

Trenz Electronic is registered 

under WEEE-

Reg.-Nr. DE97922676.

2018-09-18

Summary of Contents for TE0714 TRM























Reviews: