TE0726 TRM
Revision: V.3
Copyright © 2017 Trenz Electronic GmbH
Page
of
17
21
http://www.trenz-electronic.de
Technical Specifications
If TE0726 module is powered by micro-USB connector J1 V
pin, which voltage level is controlled by
BUS
supplying host according to the USB standards and should be 5V, there is not much user can control here if
using standard USB equipment. However, user can also power the module by applying voltage to the J5
connector from other external sources. In both cases following maximum voltage ratings apply.
Absolute Maximum Ratings
Parameter
Min
Max
Units
Notes
Power supply voltage
J1: USB_V_BUS
J5: 5V
4.75
5.25
V
-
V
of AP2152SG-13
OUT
-
VIN + 0.3
V
Output voltage.
I
of AP2152SG-13
LOAD
-
Internal limited
A
Maximum continuous load current.
PS MIO input voltage
-0.4
VC 0.55
V
VCCO_MIO0_500 and VCCO_MIO1_501.
PL Bank 34 I/O input voltage
-0.4
V 0.55
V
-
PL Bank 35 I/O input voltage
-0.4
V 0.55
V
-
Storage temperature
-55
+125
°C
-
See also the Xilinx datasheet DS187 for more information about absolute maximum ratings.
Recommended Operating Conditions
Parameter
Min
Max
Units
Notes
Power supply voltage
4.75
5.5
V
See AP2152SG-13 datasheet.
I
of AP2152SG-13
OUT
0
500
mA
-
PS MIO input voltage
-0.2
VC 0.2
V
VCCO_MIO0_500 and VCCO_MIO1_501.
PL Bank 34 I/O input voltage
-0.2
V 0.2
V
-
PL Bank 35 I/O input voltage
-0.2
V 0.2
V
-
Operating temperature
0
70
°C
See LAN9514 datasheet.
The module operating temperature range depends on customer design and cooling solution. Please contact
us for options.
