Trevi 8011000024073, User Manual

RC 80D6 DAB

English

To keep the clock running and to store the time even during a temporary power 
failure, insert two “AAA” batteries (not supplied) in the battery compartment (6) on 
the bottom of the appliance following the polarity indications printed on the mobile.

Operation

Power On/Off-Standby:

1.  Extend the telescopic antenna (8).

If the display does not show the time:

2.   Press and hold for 3 seconds 

/SOURCE (15) button;

If the display shows the time (Stand-by function): 

3. Press 

/SOURCE (15) button;

4.  Press and hold 

/SOURCE (15) button for 2 seconds to put the appliance in  

  Stand-by mode (the time and date are shown on the display);

5.  Press and hold 

/SOURCE (15) button for 2 seconds to completely switch off  

  the appliance (no display remains on the display).

Volume adjustment

Turn the VOLUME knob (2) to increase or decrease the volume.

Setting alarm

To set alarm 1 or 2, follow the next steps: 
1.  In radio mode, press the AL1 (11) or AL2 (16) button to enter the alarm settings  

  and confirm with the ENTER button (17);

2.  Press the MEM-/SCAN- (12) or MEM +/SCAN+ (14) button to adjust the time and

  confirm with the ENTER key (17);

3.  Use the MEM-/SCAN- (12) or MEM+/SCAN+ (14) button again to adjust the  

  minutes and confirm with the ENTER key (17);

4.  Use the MEM-/SCAN- (12) or MEM+/SCAN+ (14) button to select the duration 

  and confirm with the ENTER key (17);

5.  Press the MEM-/SCAN- (12) or MEM+/SCAN+ (14) button to select the type of  

  ringtone (FM, DAB or BUZZER) and confirm with the ENTER key (17);

6.  Press the MEM-/SCAN- (12) or MEM+/SCAN+ (14) button to select the fre 

  quency (once, daily, weekly, week-end only) and confirm with the ENTER key  

 (17);

7.  Press the MEM-/SCAN- (12) or MEM+/SCAN+ (14) button to adjust the volume  

  and confirm with the ENTER key (17);

8. 

Press the MEM-/SCAN- (12) or MEM+/SCAN+ (14) 

button

 to activate or

  deactivate the alarm and confirm with the ENTER key (17).

Turn off the alarm

To stop the alarm completely (ringtone or radio) press 

/SOURCE (15) button.

To stop the alarm sound, press the SNOOZE button (13); the interruption lasts 9 
minutes, after which the alarm goes back on.