ME 3P80 RC
6
English
WEATHER STATION
Open the battery compartment (23) on the back of the appliance and insert three “AAA” size batteries observing the indicated
polarities.
EXTERNAL SENSOR
Open the battery compartment (28) on the back of the appliance, and insert two “AAA” size batteries observing the indicated
polarities.
DISPLAY UNIT PLACEMENT
Place the display unit in a dry area free of dirt and dust. Display unit stands up right for tabletop/countertop use.
OUTDOOR SENSOR PLACEMENT
1. The sensor must be placed outside to observe outdoor conditions. It is water resistant and designed for general outdoor
use, however, to prevent damage place the sensor in an area which is protected from the direct weather elements and
direct sunshine. The best location is 1.5 to 2.5 meters above the ground with permanent shade and plenty of fresh air
to circulate around the sensor;
2. Display unit and outdoor sensor must be within 30 meters of each other;
3. In order to maximize the wireless range, place units away from large metallic items, thick walls, metal surfaces or other
objects that may limit wireless communications;
4. To prevent wireless interferences, place both units at least 1.5 meters away from electronic devices (EX: TV, computer,
microwave etc...)
Note1: in case of lack of communication between the weather station and the external sensor it is necessary to press the CH
key (19) for a long time until the signal reception icon appears on the display from the external sensor. It is then necessary
to wait a few minutes for the connection to be made. Alternatively, it is necessary to repeat steps 1 to 3 described above.
Note2: Position the weather station away from devices that generate magnetic fields such as mobile phones, televisions, etc...
DESCRIPTION OF CONTROL
1. Weather station low battery indicator
2. Alarm clock icon
3. Time/ Calendar/ Alarm display
4. RCC signal, radio control icon
5. Weather forecast icon
6. Barometer, Atmospheric pressure indication
7. Indoor Comfort display
8. Indoor temperature and humidity
9. External sensor transmission channel
10. Channel 1 outdoor sensor signal strenght
11. Channel 2 outdoor temperature and humidity
MAX/ MIN records
12. Channel 2 outdoor temperature and humidity
13. Channel 3 sensor low battery indicator
14. Channel 3 outdoor temperature and humidity
15. SNZ/ LIGHT button
16. SET button
17. ALARM button
18. MEM button
19. CH button
20. UP button
21. DOWN button
22. Wall mount hole
23. Battery Compartment 3xAAA (batteries not included)
24. Pedestal
25. Wireless signal indicator
(Flashes when data is being sent to the display unit)
26. Integrated hang hole
27. TX channel selector, select external sensor channel
28. Compartment 2xAAA batteries (batteries not included)
Summary of Contents for 8011000026954
Page 1: ...ME 3P80 RC 1...
