Trevi XF 350, User Manual

XF 350

10

ENGLISH

Unless otherwise indicated, the controls have the same functions on the appliance and 

on the remote control.

BATTERY RECHARGE

1.   With the appliance switched off, connect the cable of a power supply unit (not supplied)
 5V   1A with microUSB socket at the socket (L) of the device. Connect the power 

supply to a mains socket.

2.   The LED next to the socket (L) will light up red.
3.   When charging is complete, the LEDs next to the socket (L) will light up red and green.

In case of sudden shutdown or abnormal operation of the appliance, proceed with the 

complete recharging of the battery.

Note: For a good battery life it is recommended to keep the device switched off during 

the charging phase.

POWER ON/OFF

1.   Turn the switch (A) to the ON position to turn on the appliance.
2.   Turn the switch (A) to the OFF position to switch off the appliance.
3.   Using the remote control, press the on / standby button (A) to switch the appliance off 

and on.

VOLUME ADJUSTMENT - MUTE FUNCTION - EQ FUNCTION

1.   Turn the Volume knob (M) clockwise to increase the volume of the appliance.
2.   Turn the Volume knob (M) counterclockwise to decrease the volume of the appliance.
3.   Use the Vol- (I) and Vol + (J) buttons on the remote control to adjust the volume.
4.   From the remote control, press the MUTE button (F) to immediately silence the device, 

press it again to reactivate the audio.

5.   Use the EQ button (C) on the remote control to change the audio dynamic during playback; 

4 equalizations are available (0, 1, 2, 3).

RADIO

AUTOMATIC STORAGE STORAGE

1.   Press the MODE button (D) several times until the radio frequency appears on the display.
2.   Press the 



 (H) button to automatically search and memorize radio stations; the 

search / memorization will stop when the entire radio band scan is complete. At the end 
the first memorized radio station will be played.

RECALL OF THE STORED STATION

1.   To recall the number of a stored station use the keys 

:

 (I) to go to the next station or 

9

 (G) to go to the previous station.

  Use the PREV (G) and NEXT (H) buttons on the remote control.
2.   By long pressing the key 

:

 (I) or 

9

 (G) it is possible to search the next / previous radio 

station with a strong signal.

Note: FM reception depends greatly on where the device is located.
The proximity of TV sets, neon lamps or other household appliances can cause disturbances 

in the reception of radio programs, in this case remove the appliance.