11
immediately after using and / or before touching any
accessory, especially the blades. If some food stops the
blades before removing it, unplug the unit from the
electrical outlet.
Not exceed the maximum capacity for ingredients as
indicated in the Operating section.
At the end of processing, wait for the blade to completely
stops before removing the food from the glass container.
When finished using the unit, it is advisable to wrap the
power cord so as to ensure a better cleaning, avoiding any
risk of damage.
When mincing fruits, remove the pit and/or any tough
rind.
For cleaning, we recommend using warm water only,
limiting the use of detergents. In this case, rinse the part
profusely. Do not immerse the motor unit in water or
other liquids; clean it with a damp cloth.
Caution: blades are very sharp; pay attention not to
cut yourself while removing the attachment or during
cleaning operations.
DESCRIPTION G20081
1.
Working button 1
2.
Container slot
3.
Transparent
container
4.
Lid
5.
Low blades
rostrum
6.
Main body
7.
Working button 2
8.
Optional blade
9.
High blades rostrum
10. filtering basket
TRADITIONAL CHOPPER
Use this method for a fine and homogeneous compund
1)
Fit the transparent container (3) properly into main body (6) by turning it clockwise into
place (2) until it snaps.
2)
Insert the low blades rostrum (5) in the container (3) without touching the blades.
3)
In order to obtain a faster chop for a higher quantity of food add the optional blade (8) over
the rostrum with low blades (5)
4)
Insert the food without exceeding the maximum capacity.
5)
Fit the lid properly over the container, by turning clockwise until it clicks in position.
6)
Plug the unit and push the operation button to turn it on, use the working button one 1 for hard food or the
working button 2 for soft or partially worked food
