5
-
Place the food inside a containers and not directly on the scale. Gently put the containers on the scale.
Failure to comply with these instructions may invalidate the warranty in case of damages.
-
After finishing weight operation, empty the scale.
-
The buttons should be pushed gently and only with fingers. If the display does not light up, it could be
a battery problem: check that they are correctly installed and they are not exhausted.
-
Not suitable for commercial use. Suitable only for household use.
-
Do not immerse in water or other liquids and avoid splashing of water; clean it with a damp cloth
only. Do not subject the product to strong impacts, serious damage may result.
-
Do not use as a shelf for supporting objects.
DESCRIPTION G20082
1 ON/TARE button
2 BASE
3 LCD display
4 MODE button
5 Body
6 Stainless steel weighting plate
DISPLAY
In the middle the weight value is visualized
On the right, the weighting unit.
On the left, starting from the top, the
following symbols:
T, TARE indicator
0, ZERO indicator
-, negative value
MODE:
weight mode,
milk volume mode,
water volume mode
BUTTONS DESCRIPTION
ON/ZERO button (1):
Press to turn on/off the unit, and for TARE function
MODE button (4):
Press to change weighting mode
TARE button (under the base (2)):
Press to change unit
INSERT BATTERIES
The compartment for battery is under the scale. The scale works with 1xCR2032 lithium battery.
-
Open the door by pulling the lock tab. Remove any battery by gently pulling on the metal tab on the
edge of your battery. Insert the battery with the plus sign (+) facing up.
-
To insert, push the battery into its slot until it stops. Close the cover.
CAUTION
-
Always use lithium batteries CR2032 type.
-
Be sure to insert the battery according to the correct polarity as otherwise they may leak and damage
the scale. Such damage is not covered by warranty.
When you are going not to use the unit for long time, it is advisable to remove the battery to prevent the
run-out.
Whatever the type of exhausted battery, it must not be thrown in the household waste, in the fire or in the
water. Each type of exhausted battery must be recycled or disposed of in the appropriate dedicated
collection centers.
OPERATING
How to weigh
-
Locate the scale on a stable surface. Place a bowl or a dish on the scale.
-
Press the ON/OFF (1) and wait for the scale to display 0.0 (see figure for reference).
-
Carry out the weighing.
Tare / Zero function
