12
DESCRIPTION OF PARTS SW10
1. Food presser
2. Top cover
3. Auger
4. Filter with mixer
5. Chamber – Container
6. Main unit
7. Juice jug with cap and Pulp jug
8. Brush
9. ON and reverse button
ASSEMBLY
-
Place the main unit (6) on a flat and stable surface.
-
Place the chamber (5), fitting it to motor unit (6) as shown in Fig B). Ensure that the parts they fit securely.
-
Place the filter (4) in the chamber, then lock it in postion on the base of the chamber (Fig. C).
-
Insert the auger (3) inside the filter (4), making sure it is securely anchored to the base (Fig. D).
NOTE
: The squeezing chamber (5) is equipped with a
rubber plug which is mounted on the base. Make sure the
plug is inserted BEFORE USE (as shown in Figure B).
At the same time, remove the rubber plug (Fig. A) during
cleaning to remove any residue that may be deposited
inside the chamber.
-
Place the cover (2) on the chamber and turn it clockwise to lock it in place
(see the arrow on the motor housing for reference as shown on Figure E).
CAUTION: If the top cover (2) has not been properly locked, the device
doesn’t work.
-
Place the round tray and the food presser (19 over the lid (2). Put juice
collector (7) in correspondence of the outlet nozzle of juice; then place
pulp jug (7) under the output pulp spout.
-
The slow juicer is assembled and ready for use (Fig. F).
FIRST USE
Install the appliance several times without plugging it or adding any fruits or vegetables. Follow these steps to
practice with the unit. Carefully wash all the parts that will come in touch with food such as the two
containers, the chamber, the lid, the micro-mesh filter and the auger. Other accessories with electrical parts,
such as the main unit, must be cleaned with a damp cloth and dry immediately.
OPERATING THE UNIT
1.
Perform the installation according to the instructions in the previous paragraph.
2.
Wash, clean and cut fruits or vegetables coarsely, taking care to remove the hard parts such as the pit or
large seeds.
3.
To switch on the unit, push ON on the power button.
4.
Insert fruits into the slot pushing them gently with the presser (1).
5.
The slow juicer will pour the juice into the glass discarding the pulp in the container.
6.
Enter foods until you get the desired amount of juice.
CAUTION: Do not use for more than 10 minutes continuously. Remember to take a 5 minutes break
after every full process.
