Tri-Americas TracVision M7, Installation Manual

Tri-Americas

™

 LNB Installation

1

KVH, TracVision, Tri-Americas, and the unique light-colored dome with dark contrasting baseplate are trademarks of

KVH Industries, Inc. All other trademarks are property of their respective companies. The information in this document is subject to 

change without notice. No company shall be liable for errors contained herein. © 2009 KVH Industries, Inc., All rights reserved. 

54-0622-02 Rev. B

TracVision M7 Configuration

These instructions explain how to install the Tri-Americas LNB in your 
TracVision

® 

system. With the Tri-Americas LNB, you no longer need to 

climb up to the antenna and change the LNB when you travel between 
North America, the Caribbean, Central America, and South America.

Depending on the LNB currently installed in the antenna, you might 
need to bypass the inverter PCB. Follow the guidelines below.

Steps Required

Technical Support

Phone: +1 401 847-3327
E-mail: techs@kvh.com

(Mon.-Fri., 9 am-6 pm ET, -5 GMT)
(Sat., 9 am-2 pm ET, -5 GMT)

Currently Installed LNB:

Perform Steps:

• Conventional Circular

• Galaxy

1. Initial Steps (page 3)

2. Bypass the Inverter PCB (page 4)

3. Install the Tri-Americas LNB (page 7)

4. Install the Tone Generators (page 10)

• Compact Circular

• Linear  Dual-output 

• Linear Quad-output

1. Initial Steps (page 3)

2. Install the Tri-Americas LNB (page 7)

3. Install the Tone Generators (page 10)

Dual-output

Linear LNB

Quad-output

Linear LNB

Conventional

Circular LNB

Galaxy

LNB

Compact

Circular LNB