A
DETAIL A
SCALE 1 : 4
If you purchased a specialty ladder (ie Deep Top, All Directional, Stock Picking, etc.),
1.
be sure to read ALL instruction packets prior to any assembly.
Place the stringer on a firm working surface, laying on its side. The back and bottom
2.
assemblies ship fastened to the stringer but are folded flat.
3
2
Attach casters to the bottom assembly
4.
using 5/16" x 1" fasteners.
Attach the guardrail to the top of the
5.
stringer assembly using 5/16" x 1" fasteners.
Attach the handrails on the outside of the
6.
guardrail using 5/16" x 1-1/2" fasteners.
Attach the handrail posts to the stringer using
7.
handrail clamps and 5/16" x 1-3/4" fasteners as
shown at the left.
Prior to standing the ladder upright, be sure to
8.
tighten all fasteners completely, including any that
may have been only hand-tightened earlier.
4
5
6
7
Pivot the back support tube, back, and bottom assemblies until their connection
3.
holes align. Connect using 5/16" x 1-1/2" fasteners.
