08/10/2003
CT104 Manual
Tri-M Engineering
Tel:
800.665.5600, 604.945.9565
1407 Kebet Way, Unit 100
Fax:
604.945.9566
Port Coquitlam, BC V3C 6L3
E-mail:
info@tri-m.com
Canada
Web
site:
www.tri-m.com
6
1.3 Can-Tainer Kit Includes:
o
1x Can -Tainer body 2", 4", 5", 6", 8", 10" or 12"
o
1x CT-EC00, Solid End cap
o
1x CT-EC01, End cap with 4x DB9 and 2x DB 25
o
1x Anti-shock mounting pad
o
2x CT-EC gaskets
o
4x Corner guides
o
8x Corner rubber stops
o
1x Tube CA glue
o
16x End cap screws
CHAPTER 2: Custom Board Mounting
PC/104 modules may be mounted horizontally method (HM) or vertically method (VM). In the HM
method, the PC/104 modules are securely held by the rubber corner system. Accessory
equipment, such as batteries and transmitters, may be attached to a PC/104-AL mounting plate
and included in the PC/104 stack.
# Boards 1st Board / Non-Stackthrough 1st Board / Stackthrough
1 0.62
0.92
2 1.26
1.58
3 1.92
2.24
4 2.58
2.90
5 3.25
3.57
6 3.91
4.23
7 4.57
4.89
8 5.23
5.55
9 5.89
6.21
10 6.56
6.88
Figure 3: Cross Section of Shock Mount Pad
