22
3-6 FUNCTIONAL CHECK-OUT ( Cont.)
Perform the following steps to ascertain that the functional
operation of the PORTA-TAC is satisfactory:
NOTE
If any observation is not as specified, refer to
Maintenance and Troubleshooting (Section VI) before proceeding
with subsequent steps
Step 1. Remove the Funnel cover plate
Step 2. Select the magazine with the appropriate contacts and load
the magazine onto the PORTA-TAC (refer to Figures 1-2
and 1-3)
Step 3. Set the LAST PART SWITCH to the OFF (up) position.
Step 4. Close the sleeve valve.
Step 5. Open the funnel and observe if a contact is present. No
contact should be present in the transfer tip. Close the
funnel.
Step 6. Momentarily depress the initial part PUSHBUTTON
switch. The PORTA-TAC will now cycle.
Step 7. Open the funnel and observe that a contact is present. Using
tweezers, remove the contact. Close funnel.
Step 8. Repeat Steps 6 through 8 until satisfied that magazine belt
advancement and contact transfer operate satisfactory.
NOTE
Only under controlled conditions
should unused contacts be re-used.
Contacts dropped or otherwise not used
during normal operations should be
re-inspected prior to returning them to stock
.
Step 9. Disconnect the sleeve valve.
Step 10. Install the funnel cover plate.
Summary of Contents for PORTA TAC E Series
