7
Model 216B BEVELMASTER
92-1783 Orig. 161006
3.
geNeRAL DesCRIPTION
The Model 216B BEVELMASTER® is a Portable ID Mount Machine Tool for
beveling, facing and/or counterboring 6" through 16" pipe. The tool is configured
with an in line feed knob, and right angle pneumatic or in line hydraulic drive
motor. A two-speed gearbox allows for high torque form tool machining or high
speed single point machining. (Single Point accessory sold separately).
3.1 DesIgN AND OPeRATION feATURes
•
The Model 216B BEVELMASTER® is designed for facing, beveling and/or
counterboring the ends of pipe or tubing in preparation for welding.
•
These machining operations may be performed either simultaneously or
separately.
•
Pipe weld preparations that meet all existing conventional codes including
the more stringent nuclear codes may be machined using the Model 216B
BEVELMASTER®.
•
The various interchangeable Jaw Blocks, Ramps and Spacers will secure the
Model 216B BEVELMASTER® to pipe and tubing with an inside diameter
of 5.18” (131.5 mm) minimum, with a maximum outside diameter of 16.00”
(406.4 mm)
•
The expanding Mandrel provides fast, accurate self-centering and alignment
to the pipe or tubing to be machined.
•
The Lathe accepts its torque through the Mandrel generated by machining
operations. No additional torque restraining devices are required.
•
The Model 216B comes with a lifting host ring, and Lathe Stand.
