930-108-01-A.04
PowerHawk 6212, 6312 and 6412 meters
01/2011
Regulatory Compliance
© 2011 Triacta Power Technologies All Rights Reserved
27
REGULATORY COMPLIANCE
The PowerHawk meter must be installed by a certified electrician with
knowledge of local safety regulations. Initial installation of the unit, and any
subsequent modification to the unit, must be inspected by the local electrical
safety authority.
The PowerHawk meter complies with the standards listed in Table 4.
Table 4: Regulatory Compliance
Equipment servicing and access
The information in this section must be considered as a mandatory
requirement, and must be strictly adhered to when installing and operating
PowerHawk 6212, 6312 and 6412 meters.
Access to equipment
The equipment must be accessible to authorized personnel only. Equipment
must be installed in areas where access can be restricted.
Servicing the equipment
No preventive maintenance is required on any of the equipment. Visually
inspect the equipment yearly and ensure it is free of dust or other particles.
If necessary, wipe with a clean cloth.
Component servicing
Individual components are not user-serviceable, and must be returned to
Triacta Power for repair. If an equipment fault occurs, do not attempt to repair
the faulty component.
Discipline
Applicable country/region
Regulatory and industry standard
Safety
United States
Canada
TUV and UL certified to IEC/EA/UL/CSA
61010-1 2
nd
Edition
CSA-C22.2 No. 61010-1-04
Emissions (EMC)
United States
Canada
FCC Part 15 Class A, ICES-003 EN55022, IEC
6100-4-5
Surge power/telephone lines
United States
Canada
ANSI/TIA968-A: 2002
CAUTION
All maintenance activities should be performed by qualified personnel
only. Do not perform any operating or maintenance procedures that are
not described in the product documentation provided by Triacta Power.
