EN
33
MAGELLAN 40
TH
Installing
5
7
6
HOW TO UNPACK YOUR SPEAKERS?
Discover the educational video on our website
http://www.trianglehifi.com
Place the speaker with the black foam down.
Put on the protective gloves for the next steps.
Remove the top foam and then remove the grille by sliding
it up. Take the protective cover off the top of the speaker by
about 10 cm.
Take the stand, the SPEC spike, the 4 screws and the Allen key
out of the accessory case.
Place the stand on the speaker and secure it with the 4 screws
provided. Tighten the SPEC spike as much as possible; the final
adjustment will be made after the speaker is installed.
WARNING: While assembling the base, it is necessary to first
engage the 4 screws by hand before carrying on with the final
screwing.
The speaker is ready to be placed on its base. To do this, make
sure not to rest the speaker solely on the SPEC spike during
handling.
Complete the installation by removing the top foam, middle
foam, and protective cover.
NOTE: It is recommended to remove the magnetic grilles when
listening.