EN
35
The original Quatuor 40
th
and Cello 40
th
come with a stand
featuring 4 rubber feet to protect your floorings.
To increase the stability of your speakers and to avoid the
transmission of sound waves, you can add decoupling spikes
to your stand as follows:
MAGELLAN 40
TH
Installing
1
1
2
2
3
3
4
Unscrew the spike assembly
until you reach the stop.
Make sure the spike is properly
positioned on the floor.
Lock the position by tightening
the top nut.
• Once your speaker is properly positioned, you need to lock the position of the SPEC to maximize efficiency.
Step 1
Step 2
Remove the caps on the
stand by unscrewing them.
Insert the spikes manually
until you reach the stop.
Using the key provided,
adjust the flatness while
decoupling your speaker from
the floor by a few millimeters.
Secure their adjustment
with the nuts provided.
