EN
42
Stereo amplifier
Use a good quality amplifier with sufficient power. It is better to use a powerful amplifier, which is less likely to distort, than
to «push» a low-powered amplifier that will clip and risk damaging your speakers.
If the amplifier has several impedance outputs, prefer the 8 Ohms output
We recommend you: :
• A 50 to 400 watt amplifier for the Quatuor 40
th
.
• A 40 to 300 watt amplifier for the Cello 40
th
.
• A 30 to 150 watt amplifier for the Duetto 40
th
.
These capacities are indicative for rooms from 15 to 70 m
2
to enjoy a comfortable sound power and a good low frequency
handling.
It is possible to choose less powerful amplifiers that focus on tone accuracy and sound image quality.
Ask a Hi-Fi professional for personalized advice and select the equipment best suited to your needs and musical preferences.
MAGELLAN 40
TH
Stereo listening
Connections
The Magellan 40
th
terminals are designed to accommodate different types of connections:
• Connection with stripped speaker cables
• Connection with fork-mounted cables
• Connection with cables mounted on banana plugs
The choice of cable is important for your audio system and should not be overlooked. An OFC cable preferably in single
stranded copper with a minimum section of 2.5mm
2
is recommended.
For the connections, make sure to comply with the following figure while respecting the polarities.
The Duetto 40
th
, Cello 40
th
and Quatuor 40
th
speakers have two sets of terminals, offering the possibility of bi-wiring as
shown on page 44.
Types of connections & cables
