Control Module
Replacement
Kit for PERFORMANCE Products
1
Kit Part Number PGRKIT16
Parts List
1. UT burner control module.
2. 2 - 1” self tapping Phillips screws.
Recommended tools:
A. Phillips screw driver.
B. Needle Nose pliers
Failure to follow instructions below can result
in severe personal injury or damage if ignored.
•
Instructions are for a qualified installer/ ser-
vice technician.
•
Read all instructions before proceeding.
•
Follow instructions in proper order.
For your safety, turn off electrical power
supply at service panel before proceeding to
avoid possible electrical shock hazard.
Failure to do so can cause severe personal
injury or death.
WARNING
WARNING
Indicates a potentially hazardous situation
which, if ignored, can result in serious
injury or substantial property damage.
Indicates special instructions on installa-
tion, operation or maintenance, which are
important to equipment but not related to
personal injury hazards.
NOTICE
WARNING
