ASSEMBLY INSTRUCTIONS FOR 31745
Sleeve wrench
Fixture loop
Glass
Socket ring
Fixture body
1. Before beginning the assembly, carefully unpack and identify all parts referring to the illustration.
2. Carefully place the glass over the socket and secure with the socket ring by sleeve wrench as
shown in the illustration. Hand tightens until snug.
3. Install proper bulbs (not provided) to each socket referring to the markings and labels on fixture
for maximum wattage.
01.06
IF IN DOUBT ABOUT ELECTRICAL INSTALLATION,
CONSULT A LICENSED ELECTRICIAN!
4.
Restore power to the installation point ON. Retain this sheet for future reference.
