Assembly Instructions
ITEM NO.:
31632
1. Thread the LOOP (A) onto the NIPPLE (B). Until tighten!
2. Thread the BOTTOM ASSEMBLE (E) onto TOP ASSEMBLE (C). Until tighten!
3. Place the GLASS FRAME (L) onto the GLASS (I). Attach the nipple hole on the
glass flame to the holes on the glass!
4. Thread the BALL NUT WITH NIPPLE (J) onto the GLASS FRAME (L) through
the RUBBER WASHER (K) & hole on the glass. Until tighten!
5. Thread the NIPPLE (H) onto the COUPLING (F). Secured by the hex nut!
6. Place TUBING (G) CHECK RING (M) GLASS HOLD (N) GLASS (I) RUBBER
WASHER (O) & STELL PLATE (P) onto the NIPPLE (H). Secured by the HEX
NUT (Q).
7. Place the COVER (R) onto GLASS (I). Secured by the BALL NUT (S)
8. Measure the height from hanging fixture to your ceiling. Cut the excess chain
and wire to fit the height.
9. Follow the wattage label on the socket cover and install correct wattage and type
bulb (no provide) onto the socket.
10. For mounting and wiring step please follow the mounting instruction sheet
enclosed.
