- 13 -
- 13 -
5.3.2
Setting the output channel
• By pressing
, set the desired output channel.
—> The channel range that can be set depends on the
type of Cassette used.
Frequency offset (fine tuning)
Important:
Only change the frequency offset in exceptional
circumstances and if there is a well-founded reason for
doing so, since once you have changed it, all connected
televisions of the cable system must be adjusted to match it
by means of corresponding fine-tuning corrections.
• Press and hold down the
▶
button until “
0
” also appears
on the display.
• Set the frequency offset (+63 … –64) with the
but-
tons.
• Press the
button.
—> The
“
INTPUT
” menu is activated.
5.3.3
Setting the input frequency (transponder frequency)
In this menu with VPS code, the name of the station is dis-
played instead of “
INPUT
”. The VPS code is not supported
by all stations!
• Press
to set the input frequency.
—> Change the position of the cursor with
▶
◀
/
.
Bx 1A
C12
OUTPUT:
+ 63…– 64
Bx 1A
C12 Fine
OUTPUT
0
▶
t > 2 s
Bx 1A
1090.0 MHz
INPUT:
I
▶
◀
/
n