- 29 -
- 29 -
• Press the
button.
—> The menu “Network Information Table” – “
NIT
”
is
activated.
Network Information Table (NIT)
• To switch NIT “
on
” or ”
off
”: Press the
button.
• Activate “
Make
” by pressing
▶
/
.
—> The NIT of all Cassettes are switched on.
—> The Cassette gets all the information it needs (output
frequencies, output symbol rates etc.) to generate the
cable NIT from all the QAM Cassettes. This process
may take a few seconds.
The display shows: “
Making ...
”.
—> Then the NIT is generated, added and sent to all
QAM Cassettes. The other QAM Cassettes also add
this new cable NIT. The status of all QAM Cassettes
in the NIT menu changes to “
on
”.
• To deactivate the new NIT: Press the
button.
—> The SAT-NIT is restored.
Notes:
– The cable NITs of the other Cassettes remain acti-
vated. When it is reactivated (“
on
”), the previously
generated NIT is added again. If you have changed
parameters in the meantime, you must select “
Make
”
to generate a new, up-to-date NIT.
– All QAM Cassettes must be equipped with a TP
module, be set and ready for reception. Cassettes
without TP modules are not taken into consideration
during the NIT setting. If the NIT is activated (“
on
”)
and parameters are modified and saved, a warning
appears in the display: “
Rebuilt NIT !!!
”.
M
Bx 1A
off
NIT:
=> Make
on / off
▶
+
–
/