- 25 -
CGS-2 764 C
o
per ation
with
a
Ca
module
In order to descramble scrambled channels a corresponding smart card is
needed.
The channels to be descrambled are set in submenu "station filter".
s
tation
filter
In this menu stations (services) of a transponder can be switched off.
Herein you select which scrambled station should be descrambled using an
adequate CA module (only via tuner "A" and "C").
01/06
Bx 4A TV +
Das Erste
—> All stations from the channel strip will be read, and then displayed
with name and station type.
—> If no station is found, the following message will appear in the dis-
play: "
FILTER no Service
".
In this case, check the configuration of the antenna system and
head-end station, as well as the previously adjusted settings for the
cassette.
—> The display shows e.g.:
Bx 4A TV + 01/06
Das Erste
Meaning of the indicators in the example:
"
Bx 4A
"
Slot 4, channel strip "
A
"
"
TV
"
TV channel type
"
+
"
The currently selected station is switched on.
"
01/06
"
The 1st of 6 stations is being displayed.
"
Das Erste
" Station name
Further possible terms displayed:
"
RA
"
Radio channel type
For radio stations, the background of the screen of the
connected TV or test receiver is darkened.
"
–
"
The currently selected station is switched off.
"
*
"
The star means that the TV or radio station selected is
scrambled. To enable the station, the CA module and
the appropriate smart card of the station provider are
required.
