- 32 -
CGS-2 764 C
o
utput
data
r ate
This menu shows the output data rate defined using the QAM settings and the
current needed output data rate.
Bx 4A
A
! ! !
DATARATE
28/51 Mb
28
: The current needed output data rate.
51
: Maximum output data rate (dependent on the settings of modulation and
symbol rate).
If the station filter is set correctly, the current needed data rate is lower than
the maximum data rate. The value fluctuates, since the data rates of individual
stations are dynamically modified by the broadcasters.
—> Is the current needed data rate higher than the maximum data rate
exclamation marks "
!!!
" appear in the display and the status LED is
blinking red/green. In this case correct the QAM settings (pages 20)
or the settings of the station filter (page 25).
Bx 4A
A
! ! !
DATARATE
54/51 Mb
• Press the button.
—> The "Network Information Table" – "
NIT
" main menu is activated.
n
et work
i
nfor m ation
t
able
(nit)
Bx 4A
off
NIT
=> Make
• To switch NIT "
on
" resp. "
off
" press the
buttons.
• Press the button to activate NIT ("
Make
").
All active cassettes which are able to output a NIT ("NIT cassettes") must be
set and ready for reception.
