- 20 -
CGT 660
o
utput
level
This menu item is used to set the output levels of the modulators of the module´s
channel strips to the same value and to level them to the output levels of the
modulators of other modules used.
Bx 1A
/B
0 dB
LEVEL
• Use the test receiver to measure the output level of the channel strip and
make note of the value.
• When adjusting the second channel strip, compare its value with the value
noted for the first channel strip.
• Measure the output levels of the other modulators used and make notes of
their values.
•
Use the
buttons to balance the higher output level of the one channel
strip to the lower output level of the other channel strip and the output levels
of the other modulators used ("
0 dB
" … "
–25 dB
").
• Press the
button.
—> The "Input channel" – "
INPUT
"
menu is activated.
i
nput
Channel
In this menu you can set the input channel. You can also carry out the fine-
tuning.
Bx 1A
/B
C 34 (578.0)
INPUT
—> Besides the channel display the appropriate input frequency is dis-
played.
• Use
to set the input channel.
