TDcH Compact Headend
EN
34
5.5.2
Satellite tuner setup
To set up a satellite tuner you have to follow the following steps:
6.
Select the
“I
nput
”
:
•
To select the required input / SAT-IF signal, click on the input field to open the drop-down list with the inputs
you can choose from.
•
Select the input you want to use.
7.
Enter the desired frequency in MHz in the frequency field:
8.
Enter the desired symbol rate:
9.
In case the input source is SCR (Satellite Channel Router)
You have to select the SCR user band and the Polarisation and Satellite position.
