4
Getting Started
Follow these easy steps to assemble your Duet Water Revitalizer:
Initial Cleaning:
1. Fill the pitcher with filtered water.
2. Place the pitcher on top of the base then press the power button.
3. Press the minute button, choose 9 minutes, then press the start button.
4. During the first cycle, it is normal that small particles could come out from
the mineral basket.
5. Wait until the Duet has completed its cycle.
6. Empty the pitcher
If the Duet had not been used for an extended period of time, we recommend performing cleaning steps.
1. Hand wash the following using a sponge with mild detergent:
pitcher, lid, spinner, and silicone ring. Rinse well.
2. Rinse the mineral basket under cold running tap water for a
few seconds. Wipe it with a soft sponge or washcloth without
detergent. Rinse well. DO NOT USE DETERGENT OR SOAP TO
WASH THE MINERAL BASKET.
3. Place the spinner in the middle of the mineral basket.
4. Position the mineral basket inside the pitcher. Push it down
at the bottom, and secure the basket by rotating it clockwise
(to the right) with a little pressure.
