10
11
8. TROUBLESHOOTING
• Check that the power cord is plugged into a working socket.
• Check that all parts have been assembled correctly.
• Contact your customer service center.
• Check whether there is a lot of pulp in the Auger Housing.
If so, turn the juicer on to remove the excess pulp.
• Check whether there is any hard objects stuck in the Feeding
Chute. The REV button may help dislodge it.
• Contact your customer service center.
• Use the REV button to dislodge any stuck pulp or produce.
• Feed the juicer at a slower pace.
• Cut your produce into smaller pieces.
• Contact your customer service center.
• Check to see if the silicone sealing ring is in place at the
bottom center of the Auger Housing.
• Check to see if there is any damage to the silicone sealing ring.
• Feed the juicer at a slower pace.
• Contact your customer service center.
• This is normal during operation and is designed to reduce strain
on the moving parts.
The motor does
not turn on.
Trouble remov-
ing the Feeding
Chute.
The juicer stops
during operation.
Leak from the
bottom of the
Auger Housing.
The Auger
Housing moves
while juicing.
