6
PRECAUTIONS
•
The Slowstar
®
must be operated on even surface; otherwise injury or accident may occur.
•
Do not place any foreign objects, such as forks, knifes, or spoons, into the juice outlet
under any circumstances; otherwise injury or accident may occur.
•
Do not move the Slowstar
®
during operation; otherwise fire, electric shock, or injury
may occur.
•
When the Duoblade
™
Auger stops while the Slowstar
®
is in use, turn the switch to the
‘REVERSE’ position for 2~3 seconds; then push the ‘ON’ button. If the Slowstar
®
is kept
running when there is an overload, the motor may become overheated and may result in
a malfunction.
•
Do not assemble or disassemble the parts while in operation; otherwise a malfunction
or injury may occur. Please assemble or disassemble the parts after stopping the
Slowstar
®
and unplug the cord from the outlet.
•
Do not use any utensil other than Plunger while inserting ingredients into the Feeding
Chute; otherwise injury or accident may occur.
•
Do not operate the Slowstar
®
for more than 30 minutes at a time; otherwise the
motor may overheat and a malfunction may occur. Please wait 5 minutes before
operating the Slowstar
®
again.
•
Do not apply excessive impact on the Slowstar
®
or drop it; otherwise electric shock,
impairment, or fire may occur.
•
Please unplug the Slowstar
®
when not in use, and do not unplug it by pulling the cord,
otherwise, injury, accident, or malfunctioning may occur.
•
Stop operating the Slowstar
®
when strange noises, excessive heat, or smoke is noticed.
Contact the distributor or warranty service center.
•
The Slowstar
®
weighs approximately 9 kg, and must be moved using both hands.
You may drop the Slowstar
®
by moving it with one hand, and injury or a malfunction
may occur.
•
Do not wash the Slowstar
®
with water higher than 80°F because if may result in
a malfunction or product variation.
