TriBrer AFD600, User Manual

You are cautioned that changes or modifications not espressly approved in this document 
could void yout authority to operate this equipment.
To reduce the risk of fire or electric shock,do not expose this apparatus to rain or moisture.
To avoid electrical shock, do not open the cabinet. Refer servicing to qualified personnel only.

As the laser is harmful to the eyes, do not attempt to disassemble the cabinet.

Precautions for Use

Use Power

As much as possible, avoid sudden temperature changes. Do not attempt to use the drive immediately after moving it from a cold 

to a warm location, to raising the room temperature suddenly, as condensation may form with in the drive. If the temperature 
changes suddenly while using the drive, stop using it and take out batteries for at least an hour.

1

NOTE

NOTE

WARNING

WARNING

Wavelength:635-650nm

Wavelength:635-650nm

VISIBLE LASER RADIATION

VISIBLE LASER RADIATION

SEMICONDUCTOR LASER

SEMICONDUCTOR LASER

AVOD EYE OR SKIN EXPOSURE

AVOD EYE OR SKIN EXPOSURE

TO DIRECT OR SCATTERED RADIATION

TO DIRECT OR SCATTERED RADIATION

Wavelength:800-1700nm

Wavelength:800-1700nm

INVISIBLE LASER RADIATION

INVISIBLE LASER RADIATION

SEMICONDUCTOR LASER

SEMICONDUCTOR LASER

AVOD EYE OR SKIN EXPOSURE

AVOD EYE OR SKIN EXPOSURE

TO DIRECT OR SCATTERED RADIATION

TO DIRECT OR SCATTERED RADIATION

CLASS I LASER PRODUCT

CLASS I LASER PRODUCT

    When long time no use,must take out the batteries to avoid destroying the device.

    This device should use special lithium batteries. To avoid explosion, no use of the non-original batteries. No altering, dismantling or 
maintaining  operations unless professionals. Please use DC power adapter which is 9.5V~10.5V, electric current over 2A to charge the 
device. There is blameless charge controlling circuit inside. 

Avoiding condensation problems

Storage