Cautions
Cautions
Do not use and store the fusion splicer in a high temperature and humidity environment . Otherwise, it may cause damage
to the equipment.
Do not touch the heat-shrinkable tube during the heating or just ending, because the heat shrink is hot and may cause burns.
Do not touch the fusion splicer, AC power cord and AC plug when wet hand, otherwise it may cause electric shock.
Do not use any chemicals other than alcohol to clean microscope lenses, V-grooves, LCD screen, etc., otherwise it may
cause blurred images, stains, etc., and may even cause equipment's corrosion and damage.
In the dusty environment, dust-proof measures must be taken to prevent
dust from entering the machine and causing trouble.
Do not allow the fusion splicer to be subjected to strong vibration and shocks, otherwise the machine will be damaged.
Please use a dedicated carrier to transport or store the fusion splicer.
Using the battery
The equipment can use a disposable alkaline battery or rechargeable battery, and can not be mixed with different types or
different capacity batteries. Only rechargeable batteries can be charged.
Avoiding condensation:
Sudden changes in temperature should be avoided. Do not use the device immediately after moving the device from the cold
area to the hot area, or when the room suddenly heats up, because the device may have condensation phenomenon. If the
temperature changes abruptly , stop using it and take out the battery, and the power can be switched on after at least an hour.
Storage
When the device is not used for a long time, please take out the battery to avoid the damage caused by battery leakage .
All is subjected to the physical products, the manual here is just only for reference.
:
:
2
