5
•
Use appropriate lifting equipment.
•
Care should be taken around grounds work machinery.
•
Keep proper footing and balance at all time.
2
Introduction: Tricel Pumping Chamber
Tricel Pumping Chambers are manufactured from Sheet Moulding Compound (SMC).
Sheet moulding
compound (SMC) resin is a fiberglass-based compression moulding that is used in applications that require
high strength and durability.
Tricel pumping chambers are suitable for domestic and light commercial applications and used where gravity
drainage is not possible. The Tricel Pumping Chamber comes with a Tricel 75 pump as standard for treated
effluent and a GRI11 for raw sewage. The GRI 11 pump is also available if greater distances or a higher head is
required.
The tank is constructed from GRP and collects the effluent or foul water from low-lying developments and
pumps to the discharge point at a higher level e.g. main sewer, treatment plant or percolation area. The pump
in the pumping chamber is fitted with a control float, which activates the pump when the capacity has
reached a pre-defined level. There is a high-level float which is connected to an alarm. If this float rises the
alarm will activate alerting the home owner to possible pump failure or blockage.
Summary of Contents for Pumping Chamber 2600
