7
Fig. 9
Hook the decora-
tive panel onto the
t o p p a r t o f t h e
door, inserting the
p i n s ( B ) ( o n t h e
door) into the elon-
gated holes (1) (in
the top bracket fit-
ted to the panel)
(Fig. 9).
Insert the securing screws (C) through elongated
holes (2) and fix the panel without tightening the
screws (Fig. 9).
Fig. 10
Once the top of the
p a n e l h a s b e e n
c o r re c t l y p o s i -
t i o n e d , fix i t
through the holes
i n t h e b o t t o m
bracket, without
t i g h t e n i n g t h e
screws (Fig. 10).
Fig. 11
Check the position
again by slacken-
ing the screws and
p i n s t h e n , o n c e
the best position
h a s b e e n o b -
tained, fully tighten
all the fixings.
Cover the visible
part of the top
bracket on the panel
with plastic cover (D), inserting it in the locations pro-
vided in the bracket.
Fig. 12
Once the door has
ben correctly ali-
gned, tighten the
h o l d i n g n u t s o n
the fixing brackets
and attach the ap-
pliance to the adja-
cent units and the
bottom of the work
surface (Fig. 12).
D533
1
B
2
C
D471
D472
D
D517
Fig. 13
If the appliance has
been fitted into a
s p a c e 8 2 0 m m
high and the maxi-
mum height of the
base plate is 100
mm, fit the front
c o v e r p l a t e b y
p u s h i n g t h e t w o
vertical lugs into
t h e re c t a n g u l a r
holes on the bottom
side of the ventilation duct until they click. The plate
can be adjusted backwards or forwards in the holes
(Fig. 13).
Fig. 14
If the base plate is
between 100 and
135 mm high, cut it
a s s h o w n i n
Fig. 15 and mount
a s d e s c r i b e d
above.
If the base plate is
between 135 and
170 mm high, cut it
a s s h o w n i n
Fig. 13.
Fig. 15
I f t h e a p p l i a n c e
h a s b e e n fit t e d
into a space 870
mm high and the
maximum height
of the base plate is
1 5 0 m m , fit t h e
front cover plate
a s d e s c r i b e d i n
Fig. 14.
If the base plate is between 150 and 185 mm high, cut
it as shown in Fig. 15.
If the base plate is between 185 and 220 mm high, cut
it as shown in Fig. 13.
135
185
170
220
600
820
870
D518
100
150
820
870
20÷80
D519
100÷135
150÷185
820
870
D520